Table of Contents
Advertisement
6. Maintenance Screens
Maintenance-related menus include the menu
the menu
When the menu
The screen changes to the On-board screen. Refer to the section "6.4 On-board screen".
(Note) With the MELDAS610M/630M, the Custom Release screen can also be displayed by
When the menu
The following menus appear.
Abs pos
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
for displaying the Ladder monitor screen.
Ladder monitor
Ladder monitor
setting the parameters.
is pressed.
Mainte
Menu
Psswd
This changes the screen related to the maintenance
input
by setting the password.
This forcible stops the PLC ladder process. If this
menu key is pressed in the stopped state, the stop is
PLC
canceled.
stop
This changes the screen to that for setting the absolute
To
position zero point.
This changes the screen to that for testing the auxiliary
AUX
test
axis operation.
This sets the options.
Option
setting
This formats the NC memory.
Format
This changes the screen to the Data Input/Output
To
In/out
screen.
This changes the screen to the Parameter screen.
To
param
This backs up the NC SRAM information in a file
SRAM
backup
(SRAM.DAT) on the HD.
This quits the screen operation.
HMI
Quit
search engine
6. Maintenance Screens
for selecting maintenance-related screens, and
Mainte
is pressed:
Details
I – 307
Type
Reference
A
–
6.1 Maintenance
screen
C
(1) Display items
1. PLC stop
state
6.2 Absolute
C
Position Setting
screen
6.3 AUX test
C
operation screen
–
C
B
–
3.3 Data Input/
C
Output screen
3.4 Parameter
C
screens
−
B
B
–
Advertisement
Table of Contents
