Mitsubishi Electric MELDAS 600M Series Instruction Manual page 135

3.2.1 Setting the coordinate system offset data
(1) Setting the offset data of coordinate system G54 to G59
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Confirm the setting mode
(absolute/incremental) in the
upper right area of the screen.
Press the menu key
to change the setting mode.
2)
Press the menu key
.
Coord G54-G59
3)
Using the tab keys (
←
move the cursor to the
workpiece coordinate offset to
be set.
The coordinate system display can be changed using the page keys
Refer to section "3.2.6 Changing the coordinate system display (2)" for details.
4)
Using and , move the
↑ ↓
cursor to the axis where the
data is to be set.
5)
Set the offset data.
122
INPUT
6)
Set other data in the same
manner.
search engine
3. Setup Screens
Abs/Inc
The G54 to G59 coordinate system offset appears.
, ),
→
The set data appears, and the cursor moves to the next
data item.
I – 120
, .