Carrying Out Rotation Measurement - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(2) Menus
G54-G59
(Note) This menu appears only when the operation parameter "370015 Meas ext menu invld" is set to 0.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This sets the center shift amount. (The cursor moves to
Center
the center shift amount display column (C shift) when
shift
this is selected.)
This sets the coordinate rotation center.
Rotate
(The cursor moves to the coordinate rotation center
center
display column (Coord center) when this is selected.)
This sets the coordinate rotation angle.
Rotate
(The cursor moves to the coordinate rotation angle
angle
display column (Coord angle) when this is selected.)
The results calculated from the measurement counter
are set in the displayed workpiece coordinate offset.
Only the axis for which a value is displayed in the
Coord
measurement counter can be set.
write
(Note) IF the workpiece coordinate system to be set is
G54 to G59, the local coordinate offset value
will be zero. (Onlly for the measured axis.)
This selects the number of the coordinate system to be
displayed from the submenu (G54 to G59). When the
number is selected, that workpiece coordinate system
Coord
offset data is displayed.
Note that the cursor does not appear, and setting is not
possible.
(Setting is carried out on the
When the P No. to be displayed on the screen is input,
this displays the offset data of the expansion workpiece
Coord
coordinates (G 54.1 Pn) in the workpiece offset area.
G54.1 P
(Setting is carried out on the
This displays the offset data of the external coordinate
system.
Coord
EXT
(Setting is carried out on the
(Note)
In simple measurement (measurement without using a
touch sensor), the sensor signal is pseudo-generated,
SkipPos
and the skip position is read in. When this menu is
take in
pressed, the machine position (2 axes) is read in and
displayed in the measurement counter. (Note)
Random values can be input in each data item of M and
T on the screen.
Manual
value
When the numeric value is input, the selected M and T
functions are executed.
This can be selected when there are seven or more
display axes for the selected system . The axes
displayed are changed between the 1st to 6th axes and
Next
axis
the 7th to 8th axes.
(This is used when there are seven to eight axes in one
system.)
This changes the screen to the Coordinate System
Coord
Offset screen.
offset
This changes the screen to the Parameter screen.
To
param
This changes the screen to the Workpiece
To wkp
Measurement screen.
measure
search engine
3. Setup Screens
Details
menu.)
Coord write
menu.)
Coord write
menu.)
Coord write
I – 195
Type Reference
3.8.1 Carrying out
A rotation
measure-ment
A
A
−
C
3.2.1 Setting the
coordinate system
offset data
C
3.2 Coordinate
System Offset
A
screen
C
−
B
1.5.1 Setting a
manual value
A
command
1.5.4 Changing
the display axis
C
3.2 Coordinate
C System Offset
screen
3.4 Parameter
C
screens
3.7 Workpiece
C Measurement
screen