Setting The Coordinate System Offset Data; Erasing The Coordinate System Offset Data; Setting The Workpiece Coordinate Zero Point; Changing The Counter Display - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3. G92/G52 area
4. Absolute/
incremental selection
5. Manual value setting
6. Counter display area
(2) Menu
Menu
Coord
G54-G59
Coord
G54.1P_
Coord
G92/G52
Abs/Inc
All axs
setting
Counter
Manual
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This displays the offset amount for G92 or the local coordinate system.
The offset amount of the corresponding local coordinate system (G52) is
displayed only when the cursor is at G54 to G59.
This indicates whether the absolute value setting mode or incremental
value setting mode is selected.
This displays the command values of each M (miscellaneous function
command value) and T (tool command value).
Refer to "1.5.1 Setting a manual value command" for more details on the
manual value command.
This displays the counter (machine position, program zero point, error
compensation value). (These cannot be set.) These values are used
during operation to confirm the zero point position of the selected
coordinate system.
This displays the G54 to G59 offset. The cursor
moves to the G54 offset data. This menu can be used
when the G54 to G59 offset data is not displayed.
If the P No. to be displayed on the screen is input, this
displays the coordinate system offset data area and
expansion workpiece coordinate (G54.1 Pn) offset data.
If the local coordinate offset (G52) is displayed in the
G92/G52 area, the display will change to the G92
display.
This displays the G92 or G52 coordinate system
offset data. The G92 offset data is also displayed
when the cursor is not at the G54 to G59 offset data.
This changes the setting mode to the absolute value
mode or incremental value mode. The absolute value
setting mode is entered when the power is turned ON.
This erases the local offset data for all axes
corresponding to the offset data of the coordinate
clear
system where the cursor is located.
This erases all offset data (G54 to G59, and
ALL
expansion data), and the local offset data.
clear
This sets the coordinate system offset so that the
current machine coordinate value becomes the
Easy
workpiece coordinate zero point.
Only the axis at the cursor position is set.
This displays the submenu for changing the display
type
counter.
Random values can be input in each data item of M
and T on the screen. When the numeric value is input,
the selected M and T functions are executed. When
value
the menu key is pressed again, the mode quits and
the menu highlight returns to normal. The cursor
moves to the coordinate system offset data area.
search engine
3. Setup Screens
Details
Details
I – 119
Type Reference
3.2.1 Setting the
C coordinate system
offset data
A –
C –
1.5.3 Changing the
absolute value/
C
incremental value
setting
3.2.2 Erasing the
C coordinate system
offset data (1)
3.2.2 Erasing the
C coordinate system
offset data (2)
3.2.3 Setting the
workpiece
C
coordinate zero
point
2.1.1 Changing the
C
counter display
1.5.1 Setting a
manual value
command
A