Mitsubishi Electric MELDAS 600M Series Instruction Manual page 340

4. Operation Mode
4.1 Mode select switch
The MODE SELECT switch is used to determine the NC unit operation mode.
Jog feed mode:
Rapid traverse feed mode:
Return to reference point mode:
Incremental mode:
Handle feed mode:
Program run mode:
MDI mode:
(Note 1) See 1.4 for the running state when a change is made to another mode during automatic
Downloaded from ManualsNet.com
CHAPTER 2 MACHINE OPERATIONS
Select the mode to move the controlled axis
consecutively at manual feedrate.
Select the mode to move the controlled axis
consecutively at rapid traverse feedrate.
Select the mode to position the controlled axis
at the machine reference point manually.
Select the mode to move the controlled axis at
a given distance.
Select the mode to move the controlled axis by using the manual handle.
Select to automatically run the machining program.
Select to carry out an operation search of the device (memory, RS-232C, HD/data server, FLD,
IC Card) stored in the machining program to be run.
Select the mode for MDI operation.
operation.
search engine
4. Operation Mode
HANDLE
INCRE-
MENTAL
II – 7
MODE SELECT PROGRAM RUN
RAPID
MDI
TRAVERSE
JOG
REFERENCE
POINT
RETURN