Setup Screens; Tool Offset Amount Screen (Tool Offset Amnt Screen) - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3. Setup Screens

3.1 Tool offset amount screen ( Tool offset amnt screen )
The tool offset data is set and displayed in the Tool offset amnt screen. This screen is configured of two
areas. Seven continuous numbers can be displayed in one area.
The number of offset data items that can be used differs depending on the specifications.
Tool offset type I
The combined amount of the shape offset and wear offset are set as the offset data, with no
distinction between shape offset memory and wear offset memory. (The tool offset data is the shape
offset amount + wear offset amount.)
The offset data is used commonly for the tool length, tool position offset, tool radius, and
three-dimensional tool radius offset.
1. Program No.
3. Display
area
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
search engine
3. Setup Screens
I – 109
2. Absolute/Incremental
selection