Mitsubishi Electric MELDAS 600M Series Instruction Manual page 244

No.
16 0040
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Name
LMC non-sensi The lost motion compensation dead zone can only be
band set during feed forward control. Set in the low-order 8
(low-order 8 bits.
bits) When set to "0", 2µm will actually be set. Adjust
upwards in increments of 1µm.
Current bias This is used in combination with high-order 8 bits of
(high-order 8 SV030 and SV045.
bits)
LMC non-sensi The value set for the low-order 8 bits of the 160040 lost
band motion parameter is displayed.
search engine
3. Setup Screens
Details
I – 229
Setting range (units)
–32768 to 32767
(Note) The setting
range of the
low-order 8 bits
is 0 to 100 (µm)
(Display-only)
0 to 100 (µm)