Mitsubishi Electric MELDAS 600M Series Instruction Manual page 132

(2) Copying/pasting data at the cursor position
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Move the cursor to the data to
be copied.
(Note) One of the following methods can be used to select the data.
• Using the cursor movement keys
to be selected.
• Press
Offset No.
key.
INPUT
2)
Press menu key
Copy
3)
Move the cursor to the
position (offset No.: 104,
length wear) where the data is
to be pasted.
4)
Press the menu key
search engine
3. Setup Screens
The cursor appears at the selected data.
,
↓ ↑
, set the compensation No. in the setting area, and press the
The copied data item is highlighted.
.
Ofset No
100
101
102
103
104
105
-12345.000
106
The copied data is written in the line where the cursor is
.
Paste
at, and the menu highlight returns to normal.
The copied data is held until another line is copied.
Ofset No
100
101
102
103
104
105
-12345.000
106
I – 117
, → , and ← , move the cursor to the data
Length L wear Radius
0.000 0.000
0.000
0.000 0.000
0.000
56.000 19.000
10.000
0.000 0.000
0.000
0.000 0.000
0.000
0.000 0.000
0.000
-123.000
-12345.000
Length L wear Radius
0.000 0.000
0.000
0.000 0.000
0.000
56.000 19.000
10.000
0.000 0.000
0.000
0.000 19.000
0.000
0.000 0.000
0.000
-123.000
-12345.000
R wear
0.000
0.000
8.000
0.000
0.000
0.000
-123.000
R wear
0.000
0.000
8.000
0.000
0.000
0.000
-123.000