Formatting An Fld; Formatting An Ic Card; List Of File Names - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.3.8 Formatting an FLD

This section explains the method for formatting an FLD.
(1) Formatting an FLD

3.3.9 Formatting an IC card

This section explains the method for formatting an IC card.
(1) Formatting an IC card

3.3.10 List of file names

There is a directory for each type of data in the NC memory.
Each directory and file name (fixed) in the NC memory is shown below.
Do not change the extensions (.XXX) when storing in a device other than the NC memory.
Machining program
Fixed cycle program
Tool offset data
Common variable
Tool life data
Parameters
• User parameters
• Machine parameters
• System parameters
Tracking data
Auxiliary axis absolute
position data
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Insert a floppy disk in the FLD
drive, and press
FLD format
2)
Press or .
Y INPUT
(Note 1) The FLD is formatted with the 1.44MB format.
(Note 2) The volume label is automatically assigned when the FLD is formatted.
1)
Press the menu
IC format .
2)
Press or .
Y INPUT
Data type NC memory directory path
M01:/PRG/USR
M01:/PRG/FIX
M02:/TOL/
M02:/COM/
M02:/TLF/
M02:/PRM/
M02:/LOG/
M02:/AUX/
search engine
3. Setup Screens
A message confirming the formatting appears.
.
The FLD is formatted.
A message appears when the formatting is completed.
A message confirming the formatting appears.
The IC card is formatted.
A message appears when the formatting is completed.
Fixed file name
OFFSET. TOL
COMMON. VAR
TOOLLIFE. TLF
USER. PRM
MACHINE. PRM
SYSTEM. PRM
TRACK. MNT
AUXABS. AUX
I – 141
(Program No.)
(Program No.)