Mitsubishi Electric MELDAS 600M Series Instruction Manual page 341

4.2 Jog feed mode
The jog feed mode enables the machine to be moved consecutively at the feedrate set by using the
MANUAL FEEDRATE switch manually. The jog feed mode is started by using the FEED AXIS
SELECT switch.
See Section 5.3 for the MANUAL FEEDRATE switch.
Operation procedure
Using the MODE SELECT switch, select
the jog mode.
Using the MANUAL FEEDRATE switch,
set the feedrate.
The feedrate unit is the travel distance
(mm) per minute.
To move the controlled axis, turn on the
FEED AXIS SELECT switch. The
controlled axis is moved while the switch
is turned on.
When the switch is turned off, the
controlled axis stops with deceleration.
(Note 1) When the MANUAL OVERRIDE switch on the operation panel is turned on, the override
Downloaded from ManualsNet.com
CHAPTER 2 MACHINE OPERATIONS
value set by using the FEEDRATE OVERRIDE switch takes precedence over the feedrate
set by using the MANUAL FEEDRATE switch.
search engine
4. Operation Mode
MDI
HANDLE
INCREMENTAL
M ANUAL FEED RATE
72.0
52.0
37.0
27.0
20.0
14.0
10.0
7.2
6.2
3.7
2.7
2.0
1.4
1.0
0
FEED AXIS SELECT
+X
-X
II – 8
MODE SELECT
PROGRAM RUN
RAPID TRAVERSE
JOG
REFERENCE
POINT RETURN
100
140.0
200.0
270.0
370.0
520.0
720.0
1000.0
1400.0
2000.0
2700.0
3700.0
5200.0
7200.0
10000.0
14000.0
mm /m in
+Z +4
+Y
-Z
-Y -4