6.3 Stored stroke limit IB
The boundary is set for each axis with the parameters (axis parameters "340025 OT_IB–" and "340026
OT_IB+". The inside of the set boundary is the prohibited range.
This is valid when the axis specification parameter "130027 IB_off" is set to "0".
Downloaded from
ManualsNet.com
CHAPTER 3 MAINTENANCE
6. Setting the Stored Stroke Limit
Point 4
Range prohibited
Point 6
with stored
stroke limit IIB
Machine movement
valid range
Point 3
-
setting value
Point 1
search engine
Point 2
Point 6
Machine
coordinate
system
+ setting value
III – 33
The following values are set with the
coordinate values in the machine
coordinate system:
Point 5: 340025 OT_IB–
Point 6: 340026 OT_IB+
The area determined by points 1 and
2 is the prohibited range set with
stored stroke limit I, and the area
determined by points 3 and 4 is the
one with stored stroke limit IIB.