Mitsubishi Electric MELDAS 600M Series Instruction Manual page 508

No.
0061
0062
0063
0064
0065
Downloaded from ManualsNet.com
CHAPTER 4 APPENDICES
Appendix 4. Warning Messages
Details
Reference Automatic/manual operation was
point return started before reference point return
incomplete. was executed with the incremental
Starting not system.
possible.
In initializing The start signal was input while
absolute initializing the absolute position.
point.
Starting not
possible.
In absolute The start signal was input during an
position absolute position alarm.
alarm.
Starting not
possible.
In random The manual operation mode was
positioning started during the random
mode. positioning mode.
Manual
operation not
possible.
Uneven The commanded station No. was
indexing higher than 8 during uneven
station No. indexing.
illegal.
Starting not
possible.
search engine
• Execute the reference point
return.
• Complete the absolute position
initialization.
• Initialize the absolute position and
then fix the absolute position
coordinates.
• Turn the random positioning
mode OFF before switching to the
manual operation mode.
• Check the commanded station
No.
IV – 66
Remedy