Mitsubishi Electric MELDAS 600M Series Instruction Manual page 326

2. Machine end display
3. Various data for
absolute position
setting
(2) Menus
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
The distance from the reference point to the grid is displayed.
Display range : –99999.999 to 99999.999 (mm) (radius value display)
Meaning of display when using machine end stopper method
Meaning of display when using reference point method
This column is used to set and display the data required for absolute
position setting.
Refer to "(3) List of data related to absolute position setting" for details on
setting the absolute position.
Menu
This changes the display of the axis name and corresponding data.
Axis
After pressing this menu, set the axis name (X, Y, S1, etc.), and press
select
the key. The axis information appears in the selected area.
INPUT
This changes between the zero point initialization execution/cancel
state. During zero point initialization, "Absolute posn set" on the screen
is highlighted.
This setting is canceled when the power is turned ON.
During execution:
Abs
pos set
The absolute position detection data (Ref position set, Ref position
offset) can be changed from the setting display unit.
Canceled state:
The absolute position detection data (Ref position set, Ref position
offset) cannot be changed from the setting display unit.
search engine
6. Maintenance Screens
The distance from the machine end to the previous grid is displayed.
The distance from the marked point to the previous grid is displayed.
When a grid mask is applied, the distance to the next grid point is
displayed.
This data is set to "0" when the power is turned ON.
Details
I – 311
Details
Type
A
C