Aux Test Operation Screen - Mitsubishi Electric MELDAS 600M Series Instruction Manual

6.3 AUX test operation screen

The absolute position can be set and test operations carried out by separating the auxiliary axis control
from the PLC starting forward run (or reverse run) with the menu operations. The screen is provided
with the setting and display area on the left, and an explanation area on the right.
1. Setting and
display area
(1) Display items
1. Setting and display
area
Ope. Test mode
Absolute posn set
Form abs posn set
Status abs posn set This displays the initialization state of the
Current station No.
Current posn
Inst station No.
Inst posn
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This is highlighted when the absolute position can be initialized or test
operation is possible. This cuts off the signals from the PLC.
This is highlighted when the absolute position can be initialized.
This displays the initialization method of the
absolute position set with the auxiliary axis
parameter "700120 ABS Type".
absolute position.
This displays the number of the currently
stopped station.
This displays the current coordinate position. 0 to 360°
This displays the commanded station
number for automatic operation, or the
nearest station number to be stopped at for
manual operation.
This displays the coordinate position
corresponding to the target station number.
search engine
6. Maintenance Screens
Details
I – 314
2. Explanation
area
Display details and range
Dog / Stopper / Origin
method
Refer to the table "Position
setting display item" in
CHAPTER 3
MAINTENANCE section
"5.1.1 Initialization".
This follows the "#700100
station*" setting.
This follows the "#700100
station*" setting.
0 to 360°