Automatic Operation Pause; Automatic Operation Stop - Mitsubishi Electric MELDAS 600M Series Instruction Manual

1.4.3 Automatic operation pause

The automatic operation pause state means that operation or motion temporarily pauses during
execution of one block during the automatic operation start. The AUTO PAUSE lamp on the
machine operation panel is on and the AUTO START lamp is OFF.
(1) From automatic operation start to automatic pause (transition (7))

1.4.4 Automatic operation stop

The automatic operation stop state means that execution of one block is completed and stopped
during automatic operation start. Both the AUTO START and AUTO PAUSE lamps on the machine
operation panel are OFF.
(1) From automatic operation start to automatic operation stop (transition (8))
Downloaded from ManualsNet.com
CHAPTER 2 MACHINE OPERATIONS
• When the FEED HOLD switch on the machine operation panel is turned ON; or
• When automatic mode input is out.
• When the SINGLE BLOCK switch on the machine operation panel is turned ON and
execution of the block is complete; or
• When automatic mode input is changed to another automatic mode input.
• Operation has stopped with a program error.
search engine
1. Operation State
II – 4