Mitsubishi Electric MELDAS 600M Series Instruction Manual page 464

(3) Messages related to reception of the diagnosis results
Connecting
Receiving
(None)
(4) Messages related to reception of messages
Connecting
(None)
(5) Messages related to communication errors
Modem initial error
Communication error
2.16 Absolute position detection-related operation messages
Turn ON absolute
position set
Axis name is
inadequate
Not the abs position
detection system
Downloaded from ManualsNet.com
Appendix 2. Operation Messages
Message Display in message field
Connecting with machine
manufacturer.
Wait for communication to end.
Connecting with machine
manufacturer.
Wait for communication to end.
Press the Send menu to transmit
the diagnosis data to the machine
manufacturer.
Do not turn the power OFF during
transmission.
Message Display in message field
Connecting with machine
manufacturer.
Wait for communication to end.
Press the Send menu to transmit
the diagnosis data to the machine
manufacturer.
Do not turn the power OFF during
transmission.
Message Display in message field
Press the Send menu to transmit
the diagnosis data to the machine
manufacturer.
Do not turn the power OFF during
transmission.
Press the Send menu to transmit
the diagnosis data to the machine
manufacturer.
Do not turn the power OFF during
transmission.
Message
• Setting from the screen was attempted of absolute position detection
data when the "Abs pos set" was not ON.
→ Press the menu key "Abs pos set" to turn it ON.
• The designated axis name is illegal.
• An absolute position detection system has not been selected for the
currently selected axis.
→ The machine parameter (Axis specification parameter "130014 Abs
On∗") must be set.
search engine
CHAPTER 4 APPENDICES
IV – 22
Details
• A connection with the machine
manufacturer is established.
• The diagnosis results are actually
being received.
• Reception of the diagnosis results
has completed, and the line has
been disconnected.
Details
• A connection with the machine
manufacturer is established.
• Reception of the message has
completed, and the line has been
disconnected.
Details
• Communication is not possible
because the modem is not
connected, etc.
• An error occurred during
communication.
(Redial over, no call back,
communication error, etc.)
Details