Mitsubishi Electric MELDAS 600M Series Instruction Manual page 249

4.1.1 Creating a new machining program
(1) Operation method
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
Area change , and select the
usage area.
2)
Press the menu key
.
Newly create
3)
Input the program No.
(Note 1)
100
INPUT
When
Newly create
pressed again, the new
creation process ends.
4)
Create a machining program.
5)
Save the program.
Menu
Save file Y
(Note 1) An error occurs if an existing program No. is set.
(Note 2) The texts in parentheses ( ) at the top block of the program is the comment.
(Note 3) If the operation parameter "Program save type" is set to 1, the program is saved
each time the
menu.
File save
search engine
4. Edit Screens
The menu is highlighted, and the cursor appears at the
No. setting column.
A program consisting of only EOR is created.
is
Refer to "4.2 Editing operations".
The created machining program is saved in the NC
memory.
(Note 3)
The menu highlight returns to normal.
key is pressed. Thus, it is not necessary to press the
INPUT
I – 234