Mitsubishi Electric MELDAS 600M Series Instruction Manual page 230

4. Device Name,
file list
5. M, S, T, B
command
6. Program being
executed
7. Machining
indication
(2) Menus
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
The device names and a list of the files are displayed.
Each M, S, T, B command value is displayed.
A manual value command can be issued.
The program being executed is displayed.
"Machined" is indicated for the pallet in the machine.
Menu
The state (Machining) indicated by the cursor is
ON validated.
This menu can be used only when the cursor is at
Machining, Program Search or Program Start.
The state (Machining) indicated by the cursor is
OFF invalidated.
This menu can be used only when the cursor is at
Machining, Program Search or Program Start.
Preve The pallet details data for the previous index plane
plane
is displayed.
The pallet details data for the next index plane is
Next
plane
displayed.
A random pallet can be selected.
When the pallet No. is set and the INPUT is
Pallete
select
pressed, the 0° or 90° pallet details data for that
pallet will be displayed. The cursor will move to the
0° processing program No.
The device menu is displayed.
Designate the device of the program to be
Device
registered.
select
The selected device is registered as the device for
the program indicated by the cursor.
A random value can be set for each S, M, T and B
Manual data on the screen.
value
When a value is set, the selected S, M, T or B
function will be executed.
The program to be registered can be selected from
the file list. Select the file using the cursor displayed
From
in the list. When the INPUT key is pressed, the
list
selected file will be registered as the machining
program No.
List The file list for the device indicated by the cursor is
update
updated.
The Pallet list screen will open.
Pallete
A list of the pallets, including the pallet displayed on
list
the Pallet details screen will appear.
search engine
3. Setup Screens
Details
Details
I – 215
Type Reference
–
C
–
C
(4) Displaying
C
each pallet index
plane data 2
C
(3) Displaying
each pallet index
plane data 1
A
–
A
1.5.1 Setting a
manual value
A
command
–
A
–
C
3.11.2 Pallet list
C screen