Mitsubishi Electric MELDAS 600M Series Instruction Manual page 130

(2) Designating and erasing a line (multiple lines possible)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
.
Line clear
2)
Set the erasing range by
marking the first and last
offset Nos. with a "/", and
press the key.
INPUT
122/125
INPUT
3)
Press the or
Y INPUT
To cancel the erasing, press a
key other than and
Y
.
INPUT
(Note) If the key is pressed without setting a offset No., the line where the cursor is at
INPUT
is erased.
search engine
3. Setup Screens
The menu is highlighted.
A message confirming the erasing appears.
The offset data corresponding to the designated offset
key.
Nos. is erased, and the menu highlight returns to
normal.
The cursor moves to the first line of the erased range,
and that line becomes the first line of the display area.
Ofset No Length
122 0.000
123 0.000
124 0.000
125 0.000
126 34.000
127 42.000
128 -12345.000
I – 115
L wear Radius R wear
0.000 0.000
0.000
0.000
0.000 0.000
0.000 0.000 0.000
0.000 0.000
0.000
10.000
7.000 0.000
8.000
10.000 2.000
-123.000 -12345.000 -123.000