3.4.1 Setting the parameters
The method of setting the parameters is explained. For the setting range of each parameter, refer to "3.5
User parameter details" and the separate instruction manual.
Press the menu key to select the parameter screen, and select the data to be set with the cursor key.
(1) Setting "0" in "340011 Mirror image"
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu
Axis param
2)
Use the
,
,
→
and
↑
↓
←
keys to move the cursor to
the position to be set.
3)
Input the value.
0
INPUT
4)
Continue setting the values.
Lastly, restart the computer.
search engine
3. Setup Screens
.
The cursor moves to the position of the setting target
data.
The setting value appears, and the cursor moves.
Parameters not having a mark are validated after
setting.
Parameters with a mark are valid.
I – 148