Changing The Valid Area - Mitsubishi Electric MELDAS 600M Series Instruction Manual

1.5.2 Changing the valid area

In screens where the display area is split, such as the Position display3 screen, Input/Output screen or
Edit screen, the area containing the screen must be validated before the display can be changed or the
data set.
The display area can be changed by pressing the menu key (
changed with the tab keys (
After changing, all operations such as data setting and cursor movement are valid in that area.
(1) To change with the menu keys.
If an
the area is changed with the menu keys.
(2) To change with tab keys
The area is changed with the tab keys on the Common variable screen, Local variable screen and
Parameter screen, etc.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
← ,
Left display area is valid.
menu is provided, such as on the Position display3 screen or Input/output screen,
Area change
1) When left side of Position display3 screen is valid. (Refer to the screens above.)
Press the menu Area change .
search engine
→ ).
The right area is validated.
I – 14
). There are screens that are
Area change
Right display area is valid.