Machining Parameter Screen (Process Param Screen) - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.5.2 Machining Parameter screen (Process param screen)

The machining parameters are set. Parameters with a " " mark added are validated after restarting.
If the parameter length exceeds 12 characters, the data will be echo-backed into the data setting area.
Number
33 0001
33 0002
33 0003
33 0004
33 0005
33 0006
33 0007
33 0008
33 0009
33 0010
33 0011
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Name
Base axis I This sets the control axis address corresponding to
G17, G18 and G19.
Base axis J
Base axis K
Parallel axis
1I
Parallel axis
1J
Parallel axis
1K
Parallel axis
2I
Parallel axis
2J
Parallel axis
2K
G73 return This sets the return amount per G73/G83 (deep hole
amount drilling) command.
G83 return
amount
search engine
3. Setup Screens
Details
I – 155
Setting range (units)
Axis name
0 to 999999.999 (mm)