Mitsubishi Electric MELDAS 600M Series Instruction Manual page 25

(3) Cursor operations on the screen
If a cursor is displayed on the screen, data is set in the data setting area and the
pressed, the data appears at the cursor position on the screen.
The cursor moves to the next position.
The following keys can be used to move the cursor with the cursor keys.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
key: Deletes the character in front of the cursor.
DELETE
1)
Move the cursor to the position
where the data is to be deleted.
2)
Press the DELETE key.
key: Deletes all characters in the data setting area.
C•B ESC
1)
Press the C•B ESC key.
: Moves the cursor to the previous line.
↑
: Moves the cursor to the next line.
↓
←
: Moves the cursor one item to the left.
→ : Moves the cursor one item to the right.
search engine
The cursor moves in the data setting area.
1 2 3 7 7 4 5 6 4
The character in front of the cursor is deleted, and the
cursor moves.
1 2 3 7 7 4 5 6 4
All characters in the data setting area are deleted, and
the cursor moves to the left end.
I – 10
key is
INPUT