Table of Contents
Advertisement
3.12 Parameter Per Application screen
The parameter screen for each application can be selected from this screen.
(1) Menus
common
3.12.1 Setting the machine parameters
A password is required to set the machine parameters.
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
When a password is input, data attributed to the
Paswd
machine parameters can be set.
input
This can be selected when there are more or five
Next
display axes in the selected system. When axes
axis
displayed can be switched from the 1st to 4th axis
and the 5th to 8th axis.
The high-precision common parameter screen will
open.
Hi-prec
(Note) The machine parameters can be referred to
even if a password is not input, but the
parameters cannot be set.
The high-precision axis parameter screen will open.
Hi-prec
(Note) The machine parameters can be referred to
axis
even if a password is not input, but the
parameters cannot be set.
1)
Press the menu key
Paswd input .
2)
Set the password and press
the INPUT key.
search engine
3. Setup Screens
Details
The password input menu will be highlighted, and the
system will wait for a password to be input.
The password input menu highlight will turn OFF, and
the machine parameters can be set.
I – 218
Type
Reference
3.12.1 Setting the
A
machine
parameters
1.5.4 Changing
the display axis
C
3.13.1
High-precision
B
common
parameters
3.13.2
High-precision
B
axis parameters
Advertisement
Table of Contents
