Feature Evc - Cisco Nexus 7000 Series Command Reference Manual

feature evc

feature evc
To enable Ethernet virtual circuits (EVCs) on a Cisco NX-OS device, use the feature evc command. To
disable EVC, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to enable EVC on the Cisco NX-OS device:
switch# configure terminal
switch(config)# feature evc
This example shows how to disable EVC on the Cisco NX-OS device:
switch(config)# no feature evc
switch(config)#
Related Commands Command
show feature
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
156
feature evc
no feature evc
Modification
This command was introduced.
Description
Displays the status of features on a device.
F Commands
OL-24994-01