Cisco Nexus 7000 Series Command Reference Manual page 353

Show Commands
show mpls interfaces
To display the Multiprotocol Label Switching (MPLS) interfaces, use the show mpls interfaces
command.
Syntax Description detail
ethernet
slot/port
subinterface
statistics
internal
loopback
virtual interface number
port-channel
port channel number
tunnel-te
TE interface number
Defaults None
Command Modes
EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the traffic engineering statistics interface information:
switch# show mpls interfaces tunnel-te 1 statistics
tunnel-te1
switch#
OL-24994-01
show mpls interfaces {detail | ethernet slot/port subinterface statistics | internal | loopback
virtual interface number statistics | port-channel port channel number sub interface statistics
| tunnel-te TE interface number statistics}
Modification
This command was introduced.
MPLS disabled
Displays detailed information about the interface.
Displays the Ethernet interface.
Slot or port number. The range is from 1 to 253.
Sub interface separator.
Displays the statistics information.
Displays the internal information.
Displays the loopback interfaces.
Virtual interface number. The range is from 0 to 1023.
Port channel interface.
Port channel number. The range is from 1 to 4096.
Displays the traffic engineering interface.
Traffic engineering interface number. The range is from 0 to 65503.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls interfaces
1275