Cisco Nexus 7000 Series Command Reference Manual page 213

M Commands
mpls traffic-eng configuration
To configure Multiprotocol Label Switching (MPLS) traffic engineering (TE), use the mpls traffic-eng
configuration command.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure MPLS TE:
switch(config)# mpls traffic-eng configuration
switch(config-te)#
Related Commands Command
None
OL-24994-01
mpls traffic-eng configuration
Modification
This command was introduced.
Description
There are no related commands.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls traffic-eng configuration
1165