Cisco Nexus 7000 Series Command Reference Manual page 291

S Commands
signalling refresh interval
To configure how often the Resource Reservation Protocol (RSVP) state is refreshed, use the signalling
refresh interval command. To return to the default settings, use the no form of this command.
Syntax Description
time
Defaults 30 seconds
Command Modes RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure how often the RSVP state is refreshed:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling refresh interval 35
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
signalling refresh interval time
no signalling refresh interval time
Hello interval in seconds.The range is from 2000 to 300000.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
signalling refresh interval
1223