Cisco Nexus 7000 Series Command Reference Manual page 289
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
S Commands
signaling protocol none
To disable the signaling protocol and to use manually configured pseudowires, use the signaling
protocol none command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to disable the signaling protocol and to use manually configured pseudowires:
switch# configure terminal
switch(config)# mpls label range 17 199 static 200 500
switch(config)# interface pseudowire pw 123
switch(config-if-pseudowire)# signaling protocol none
switch(config-if-pseudowire)#
Related Commands
Command
interface pseudowire
OL-24994-01
signaling protocol none
Modification
This command was introduced.
Description
Enters interface pseudowire configuration mode and configures a static
pseudowire logical interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
signaling protocol none
1221
Advertisement
Table of Contents
