Cisco Nexus 7000 Series Command Reference Manual page 144
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
key-string
key-string
To configure an authentication string for a key, use the key-string command. To return to the default
setting, use the no form of this command.
Syntax Description
key
Defaults
None
Command Modes
Keychain key configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure an authentication string for a key:
switch# configure terminal
switch(config)# key chain keychain1
switch(config-keychain)# key 10
switch(config-keychain-key)# key-string pwd1
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1104
key-string key
no key-string key
Authentication string for a key. The key can be from 1 to 80 uppercase or
lowercase alphanumeric characters. The first character cannot be a numeral.
Modification
This command was introduced.
Description
Protocol (LDP).
K Commands
OL-24994-01
Advertisement
Table of Contents
