Cisco Nexus 7000 Series Command Reference Manual page 285

S Commands
signalling hello graceful-restart send restart-time
To configure the restart time that is advertised in the restart-capability object in hello messages, use the
signalling hello graceful-restart send restart-time command. To return to the default settings, use the
no form of this command.
Syntax Description
time
Defaults
30 seconds
Command Modes RSVP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the restart time that is advertised in the hello messages:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling hello graceful-restart send restart-time 130
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
signalling hello graceful-restart send restart-time time
no signalling hello graceful-restart send restart-time time
Hello interval in seconds.The range is from 2000 to 300000.
Modification
This command was introduced.
Description
Protocol (LDP).
signalling hello graceful-restart send restart-time
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1217