Cisco Nexus 7000 Series Command Reference Manual page 330

show ip rsvp interface
show ip rsvp interface
To display Resource Reservation Protocol (RSVP) interface information, use the show ip rsvp interface
command.
Syntax Description name
detail
backup-tunnel
Defaults None
Command Modes EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to verify the RSVP interface:
switch(config-ip-rsvp)# show ip rsvp interface
Interface
Ethernet2/2
switch(config-ip-rsvp)# show ip rsvp interface detail
Ethernet2/2 (IOD 37, IfIndex 0x1a081000, Address 1.5.4.4/24):
MPLS: enabled, Configuration:
Dynamic Owner: No, Keepalive flag: Not Set
State: Up [Flags 271458], MTU 1500
Dynamic Cleanup timer: stopped
Signalling DSCP: 48, Hello DSCP: 48
Databases:
Refresh:
Message Bundling:
Reliable Messaging:
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1252
show ip rsvp interface [name] [detail | backup-tunnel]
(Optional) Interface name for the specified interface.
(Optional) Specifies the detailed interface information.
(Optional) Specifies the backup tunnel information known to RSVP.
Modification
This command was introduced.
Ifindex
0x1a081000 37
Traffic Control State Count: 1
Neighbor Count: 0, Incoming States Count 0
Refresh Reduction Disabled (Srefresh size config 0, max 1500)
Refresh Timer stopped, Srefresh timer stopped (Interval 45000ms)
Expiry Timer stopped (Interval 30000ms, Refresh Misses 4)
Disabled (Max size 1500)
IOD MPLS Config
enabled None
Show Commands
State
Up
OL-24994-01