Ip Rsvp Signalling Hello Reroute State-Timeout Refresh Misses - Cisco Nexus 7000 Series Command Reference Manual

ip rsvp signalling hello reroute state-timeout refresh misses

ip rsvp signalling hello reroute state-timeout refresh misses
To configure the number of consecutive missed hello message before a neighbor is declared down or
unreachable for Hello State Timer (HST) functionality, use the ip rsvp signalling hello reroute
state-timeout refresh misses command. To return to the default behavior, use the no form of this
command.
Syntax Description value
Defaults
4
Command Modes
Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure the number of consecutive missed hello message before a neighbor
is declared down or unreachable for HST functionality:
switch# configure terminal
switch(config)# interface ethernet 2/2
switch(config-if)# ip rsvp signalling hello reroute state-timeout refresh misses 12
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
196
ip rsvp signalling hello reroute state-timeout refresh misses value
no ip rsvp signalling hello reroute state-timeout refresh misses vlaue
Maximum number of messages allowed in the receive window. The range is
from 1 to 64.
Modification
This command was introduced.
Description
Protocol (LDP).
I Commands
OL-24994-01