Auto-Bw (Te Interface Configuration Mode) - Cisco Nexus 7000 Series Command Reference Manual
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
auto-bw (TE interface configuration mode)
auto-bw (TE interface configuration mode)
To configure the automatic bandwidth configuration, use the auto-bw command. To restore the system
to its default condition, use the no form of this command.
Syntax Description
frequency
secs
max-bw
kbps
min-bw
collect-bw
Defaults
If the command is entered with no optional keywords, automatic bandwidth adjustment for the LSP is
enabled, with adjustments made every 24 hours and with no constraints on the bandwidth adjustments
made.If the collect-bw keyword is entered, the bandwidth is sampled but not adjusted, and the other
options, if any, are ignored.If the collect-bw keyword is not entered and some, but not all of the other
keywords are entered, the defaults for the keywords not entered are: frequency, every 24 hours; min-bw,
unconstrained (0); max-bw, unconstrained.
Command Modes
TE interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
The bandwidth command configures the initial tunnel bandwidth, which is adjusted by the auto
bandwidth mechanism.
This command requires the MPLS Services license.
Examples
This example shows how to enable automatic bandwidth adjustment for the tunnel and controls how the
bandwidth for a tunnel is adjusted:
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
124
auto-bw [frequency secs] [max-bw kbps] [min-bw kbps] [collect-bw]
no auto-bw [frequency secs] [max-bw kbps] [min-bw kbps] [collect-bw]
(Optional) Specifies the interval between bandwidth adjustments.
(Optional) Seconds. The range is from 300 to 604800 seconds.
(Optional) Specifies the maximum automatic bandwidth, in kbps, for this
path option.
(Optional) Kilobits per second. The range is from 0 to 4294967295.
(Optional) Specifies the minimum automatic bandwidth, in kbps, for this
path option.
(Optional) Collects the output rate information for the path option but does
not adjust the bandwidth of the path option.
Modification
This command was introduced.
A Commands
OL-24994-02
Advertisement
Table of Contents
