Cisco Nexus 7000 Series Command Reference Manual page 266

router rip
router rip
To enable the Routing Information Protocol (RIP), use the router rip command. To return to the default
setting, use the no form of this command.
Syntax Description
instance-tag
Defaults
None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to enable RIP:
switch# configure terminal
switch(config)#
switch(config)# feature rip
switch(config)# router rip Test1
switch(config-router)#
Related Commands Command
tunnel-te interface
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1218
router rip instance-tag
no router rip instance-tag
Instance tag that can be any case-sensitive, alphanumeric string up to 20
characters.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
R Commands
OL-24994-01