Cisco Nexus 7000 Series Command Reference Manual page 147

L Commands
l2vpn xconnect context
To enter the Xconnect configuration mode and establish a Layer 2 VPN (L2VPN) context for identifying
the two members in a Virtual Private Wire Service (VPWS), multi segment pseudowire, or local connect
service, use the l2vpn xconnect context command. To delete the Xconnect context and the associated
configuration, use the no form of this command.
Syntax Description context-name
Defaults
None
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines
The context name argument is a unique per-interface identifier for this context.
This command requires the MPLS Services license.
Examples This example shows how to enter Xconnect configuration mode and establish an L2VPN context for
identifying the two members in a VPWS, multi segment pseudowire, or local connect service:
switch# configure terminal
switch(config)# l2vpn xconnect context XCON1
switch(config-xconnect)#
This example shows how to delete the Xconnect configuration:
switch(config-xconnect)# l2vpn xconnect context XCON1
switch(config-xconnect)#
OL-24994-01
l2vpn xconnect context context-name
no l2vpn xconnect context context-name
Xconnect context name. The maximum range is 100 alphanumeric,
case-sensitive characters.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
l2vpn xconnect context
1107