Cisco Nexus 7000 Series Command Reference Manual page 304

show bgp unicast neighbors vrf
show bgp unicast neighbors vrf
To display information about Border Gateway Protocol (BGP) neighbors, use the show bgp unicast
neighbors vrf command.
Syntax Description vrf-name
ipv4
ipv6
Defaults None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display information about BGP neighbors:
switch(config-router-vrf-neighbor-af)# show bgp ipv4 unicast neighbors vrf vpn1
switch(config-router-vrf-neighbor-af)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1226
show bgp {ipv4 | ipv6} unicast neighbors vrf vrf-name
VRF name that is any case-sensitive, alphanumeric string up to 32
characters.
Specifies the IPv4 MPLS network.
Specifies the IPv6 MPLS network.
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01