Cisco Nexus 7000 Series Command Reference Manual page 172

match
match
To configure a classification criteria, use the match command. To return to the default setting, use the
no form of this command.
Syntax Description
not
mpls
experimental
topmost
exp-list
Defaults
None
Command Modes Class-map configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to specify that the packets should be matched (or not) on the 3-bit experimental
(EXP) field in the outermost (topmost) MPLS label in the MPLS header:
switch# configure terminal
switch(config)# class-map type qos match-all class-2
switch(config-cmap-qos)# match mpls experimental topmost 1
switch(config-cmap-qos)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1124
match [not] mpls experimental topmost exp-list
no match [not] mpls experimental topmost exp-list
(Optional) Negates this match result.
Specifies a match on the MPLS label.
Specifies a match on the MPLS experimental label.
Specifies a match on the MPLS topmost label.
List that can contain values and ranges. The range is from 0 to 7.
Modification
This command was introduced.
Description
Protocol (LDP).
M Commands
OL-24994-01