Cisco Nexus 7000 Series Command Reference Manual page 400

show mpls traffic-eng tunnels fast-reroute
show mpls traffic-eng tunnels fast-reroute
To display the Multiprotocol Label Switching (MPLS) label switched paths (LSPs) that are protected by
Fast Reroute (FRR), use the show mpls traffic-eng tunnels fast-reroute command.
Syntax Description summary
Defaults
None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display MPLS traffic engineering (TE) fast reroute information:
switch# show mpls traffic-eng tunnels fast-reroute summary
Fast Reroute Summary:
Protected interfaces
Protected LSPs/Sub-LSPs : 4999
Backup tunnels
Active interfaces
This example shows how to display the LSPs that are protected by FRR:
switch# show mpls traffic-eng tunnels fast-reroute
P2P Head LSPs
src tun_id [lspid]
---------------------
P2P Mid LSPs
src tun_id [lspid]
---------------------
10.1.1.4 1000 [258]
10.1.1.4 1001 [258]
10.1.1.4 1002 [258]
10.1.1.4 1003 [258]
10.1.1.4 1004 [258]
10.1.1.4 1005 [258]
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1322
show mpls traffic-eng tunnels fast-reroute [summary]
(Optional) Displays fast reroute information.
Modification
This command was introduced.
: 1
: 1
: 0
Protect
I/F
--------- ---------- -------------- ----- --------- -----
Protect
I/F
--------- ---------- -------------- ----- --------- -----
Eth2/2
Eth2/2
Eth2/2
Eth2/2
Eth2/2
Eth2/2
Bandwidth Backup
(kbps) Tunnel
Bandwidth Backup
(kbps) Tunnel
0 tunnel-te2001
0 tunnel-te2001
0 tunnel-te2001
0 tunnel-te2001
0 tunnel-te2001
0 tunnel-te2001
Show Commands
State Level Type
State Level Type
Ready any-unlim nhop
Ready any-unlim nhop
Ready any-unlim nhop
Ready any-unlim nhop
Ready any-unlim nhop
Ready any-unlim nhop
OL-24994-01