Cisco Nexus 7000 Series Command Reference Manual page 214

mpls traffic-eng flooding threshold
mpls traffic-eng flooding threshold
To set the Multiprotocol Label Switching (MPLS) flooding thresholds, use the mpls traffic-eng flooding
threshold command. To return to the default setting, use the no form of this command.
Syntax Description
down
decreased reserved bw
up
increased reserved
bandwidth
Defaults None
Command Modes Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to specify the thresholds for decreased resource availability:
switch(config)# interface ethernet 6/1
switch(config-if)# mpls traffic-eng flooding thresholds down 90
switch(config-if)#
Related Commands Command
interface tunnel-te
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1166
mpls traffic-eng flooding thresholds{down decreased reserved bw | up increased reserved
bandwidth}
no mpls traffic-eng flooding thresholds{down | up}
Specifies the thresholds for decreased resource availability.
Decreased bandwidth usage. The range is from 1 to 100.
Specifies the thresholds for increased resource availability.
increased bandwidth usage. The range is from 1 to 100.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
M Commands
OL-24994-01