Cisco Nexus 7000 Series Command Reference Manual page 339

Show Commands
show ip rsvp session
To display the Resource Reservation Protocol (RSVP) session information, use the show ip rsvp session
command.
Syntax Description destination
ip-address
Defaults None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the RSVP session information:
switch# config t
switch(config)# interface ethernet 6/1
switch(config-if)# show ip rsvp session
Total Sessions: 4
Type Destination
LSP4 10.10.10.10
LSP4 10.10.10.10
LSP4 10.10.10.14
LSP4 10.10.10.14
Total Sessions: 0
Type Destination
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show ip rsvp session [destination ip-address]
(Optional) Specifies the session based on a destination IP address.
Destination IP address.
Modification
This command was introduced.
DPort Proto/ExtTunID
20
200
10
100
DPort Proto/ExtTunID
Description
Protocol (LDP).
PSBs RSBs
10.10.10.15 1 1
10.10.10.15 1 1
10.10.10.15 1 1
10.10.10.15 1 1
PSBs RSBs
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip rsvp session
Reqs PXSBs RXSBs
0 1 0
0 1 0
0 1 0
0 1 0
Reqs PXSBs RXSBs
1261