Cisco Nexus 7000 Series Command Reference Manual page 152

list (LSP attribute configuration mode)
list (LSP attribute configuration mode)
To display the contents of the label switched path (LSP) attribute list, use the list command.
Syntax Description
This command has no arguments or keywords.
Command Modes
LSP attribute configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the content of the LSP attribute list:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# lsp attributes 1
switch(config-lsp-attr)# list
Related Commands Command
mpls traffic-eng
configuration
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1112
list
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
L Commands
OL-24994-01