Cisco Nexus 7000 Series Command Reference Manual page 265

R Commands
router ospf
To enable an Open Shortest Path First (OSPF) routing process, use the router ospf command. To return
to the default setting, use the no form of this command.
Syntax Description
router-process-tag
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Router configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to enable an OSPF routing process:
switch# configure terminal
switch(config)#
switch(config-router)#
Related Commands Command
tunnel-te interface
OL-24994-01
router ospf router-process-tag
no router ospf router-process-tag
Process name. The maximum size is 20 alphanumeric characters.
Modification
This command was introduced.
router ospf p1
Description
Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
router ospf
1217