Cisco Nexus 7000 Series Command Reference Manual page 293
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
S Commands
signalling refresh reduction
To enable the Resource Reservation Protocol (RSVP) refresh reduction, use the signalling refresh
reduction command. To disable RSVP refresh reduction, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Enabled
Command Modes
RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to enable RSVP refresh reduction:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling refresh reduction
switch(config-ip-rsvp)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
signalling refresh reduction
no signalling refresh reduction
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
signalling refresh reduction
1225
Advertisement
Table of Contents
