Ip Rsvp Signalling Hello Dscp - Cisco Nexus 7000 Series Command Reference Manual

ip rsvp signalling hello dscp

ip rsvp signalling hello dscp
To set the differentiated services code point (DSCP) value that is in the IP header of the hello message,
use the ip rsvp signalling hello dscp command. To revert to the default settings, use the no form of this
command.
Syntax Description
value
Defaults
48.
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to set the DSCP value that is in the IP header of the hello message:
switch# configure terminal
switch(config)# interface ethernet 2/2
switch(config-if)# ip rsvp signalling hello dscp 1
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
194
ip rsvp signalling hello dscp value
no ip rsvp signalling hello dscp value
Differentiated Services Code Point (DSCP) value. The range is from 0 to
63.
Modification
This command was introduced.
Description
Protocol (LDP).
I Commands
OL-24994-01