Cisco Nexus 7000 Series Command Reference Manual page 322

show ip rsvp authentication
show ip rsvp authentication
To display the authentication for the Resource Reservation Protocol (RSVP), use the show ip rsvp
authentication command.
Syntax Description interface
name
neighbor
ip-address
detail
Defaults
None
Command Modes
EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display the RSVP authentication information:
switch# config t
switch(config)# ip rsvp
switch(config-ip-rsvp)# show ip rsvp authentication
Codes: S - static, D - dynamic, C - chain,
From
4.5.4.5
5.5.1.5
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1244
show ip rsvp authentication [interface name] [neighbor ip-address [detail]
(Optional) Specifies the authentication interface information.
(Optional) Authentication name.
(Optional) Specifies the authentication neighbor information.
IP address.
(Optional) Specifies the detailed authentication information.
Modification
This command was introduced.
G - global, N - neighbor, I - interface,
To
10.10.10.14
10.10.10.10
Description
Protocol (LDP).
Neighbor I/F
4.5.4.4 Eth2/3 SEND key1
5.5.1.1 Eth2/6 SEND key1
Show Commands
Mode Key-Src Key-ID Code
4660 SGC
4660 SGC
OL-24994-01