Cisco Nexus 7000 Series Command Reference Manual page 313

Show Commands
show ip ospf mpls ldp interface
To display the configuration status of the Multiprotocol Label Switching (MPLS) Label Distribution
Protocol (LDP) Interior Gateway Protocol (IGP) synchronization on the Open Shortest Path First
(OSPF) interfaces, use the show ip ospf mpls ldp interface command.
Syntax Description ethernet
slot/port
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the configuration status of the MPLS LDP and IGP synchronization
on the OSPF interfaces:
switch# config t
Enter configuration commands, one per line.
switch(config)# interface ethernet 7/1
switch(config-if)# show ip ospf mpls ldp interface ethernet 7/1
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show ip ospf mpls ldp interface [ethernet slot/port]
(Optional) Specifies an Ethernet interface.
(Optional) Slot or chassis number. The range is from 1 to 253 characters.
Modification
This command was introduced.
Description
Protocol (LDP).
End with CNTL/Z.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip ospf mpls ldp interface
1235