Cisco Nexus 7000 Series Command Reference Manual page 298
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
state enabled
state enabled
To enable a port profile, use the state enabled command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
config-if-prof mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure a VPN ID on a VFI context:
switch# configure terminal
switch(config)# port-profile type pseudowire Test1
switch(config-if-prof)# encapsulation mpls
switch(config-if-prof)# state enabled
switch(config-if-prof)#
Related Commands
Command
encapsulation mpls
interface pseudowire
port-profile type
pseudowire
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1230
state enabled
Modification
This command was introduced.
Description
Specifies MPLS encapsulation for this profile.
Enters interface pseudowire configuration mode and configures a static
pseudowire logical interface.
Enters interface port-profile configuration mode and configures a port
profile.
S Commands
OL-24994-01
Advertisement
Table of Contents
