Cisco Nexus 7000 Series Command Reference Manual page 158

logging events frr-protection backup
logging events frr-protection backup
To configure the generation of system logs when a primary LSP is assigned an FRR backup tunnel, use
the logging events frr-protection backup command. To stop logging these system messages, use the no
form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
If this feature and FRR-ready logging are both configured, the initial backup assignment for a new
primary LSP will generate two separate system logs.
Examples The following example shows how to configure FRR backup assignment.
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging events frr-protection backup
switch(config-te)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1118
logging events frr-protection backup
no logging events frr-protection backup
Modification
This command was introduced.
L Commands
OL-24994-01