Cisco Nexus 7000 Series Command Reference Manual page 408

show running-config interface
show running-config interface
To display the running configuration for the tunnel interface, use the show running-config interface
command.
Syntax Description tunnel
number
tunnel-te
number
Defaults None
Command Modes
EXEC
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
This example shows how to display the running configuration for the tunnel interface:
Examples
switch# show running-config interface tunnel-te 1
!Command: show running-config interface tunnel-te1
!Time: Wed Nov 24 04:58:56 2010
version 5.0(1)
interface tunnel-te1
ip unnumbered loopback0
mpls ip
no shutdown
switch(config)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1330
show running-config interface [tunnel number | tunnel-te number]
(Optional) Displays the tunnel interface.
Tunnel interface number. The range is from 0 to 4095.
(Optional) Displays the traffic engineering interface (TE).
Traffic engineering interface number. The range is from 0 to 65503.
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01